Essential Oils for Skin & Hair
Always dilute before use on skin or hair
✨
Skin Care
Face & Body
- 1Choose your carrier oil (coconut, jojoba, rosehip, sweet almond)
- 2Add 2–3 drops of essential oil per teaspoon (5ml) of carrier oil
- 3Mix well in your palm or a small bowl
- 4Apply gently to face or body — avoid eyes and mucous membranes
- 5Do a patch test on inner wrist 24hrs before first use
💧 2–3 drops per 5ml carrier oil
💡 Best oils for skin: Lavender, Tea Tree, Rosehip, Frankincense, Geranium
🧪
Skincare Products
Serums, Creams, Lotions
- 1Prepare your base (lotion, cream, or serum base)
- 2Add essential oil at 1–2% concentration (1–2 drops per 5ml base)
- 3Stir thoroughly to blend evenly
- 4Store in a dark glass container away from sunlight
- 5Use within 3–6 months of formulation
💧 1–2% concentration (max 2 drops per 5ml)
💡 Best oils: Lavender (soothing), Frankincense (anti-ageing), Tea Tree (blemishes), Rose (hydration)
💆
Serum Making
Face Serums
- 1Start with a lightweight carrier (rosehip, argan, squalane)
- 2Add active essential oil at 1-2% (approx. 5 drops per 30ml)
- 3Optional: add vitamin E oil as a natural preservative
- 4Pour into a dark dropper bottle
- 5Apply 3–5 drops to clean skin morning or night
💧 1-2% (5 drops per 30ml)
💡 Popular serum oils: Rosehip + Lavender for glow, Tea Tree + Jojoba for acne-prone skin
💇
Hair Care
Scalp & Hair Treatments
- 1Mix 3–5 drops of essential oil into 1 tablespoon (15ml) of carrier oil
- 2Warm slightly in palms
- 3Massage into scalp in circular motions for 5 minutes
- 4Leave on for 30 mins (or overnight with a hair wrap)
- 5Wash out with shampoo — repeat 1–2x per week
💧 3–5 drops per tablespoon carrier oil
💡 Best for hair: Rosemary (growth), Peppermint (stimulating), Lavender (scalp calm), Tea Tree (dandruff)
🫙
Hair Care Products
Shampoo, Conditioner, Masks
- 1Measure your shampoo or conditioner base into a bowl
- 2Add essential oil at 1–2% (10 drops per 100ml product)
- 3Stir gently — do not shake (to avoid excess foam)
- 4Pour into your bottle and label with date
- 5Use within 3 months
💧 10 drops per 100ml product
💡 Peppermint in shampoo = tingly, refreshing scalp. Lavender in conditioner = soft, calm scent.
🧼
Personal Care Products
Body Wash, Scrubs, Deodorants
- 1Add essential oil to your base product (body wash, scrub, balm)
- 2Use 1–2% dilution — about 10–20 drops per 100ml base
- 3For sugar scrubs: blend oil into sugar + coconut oil base first
- 4For deodorant sticks: add to melted base before pouring
- 5Always do a patch test for rinse-off and leave-on products
💧 10–20 drops per 100ml
💡 Citrus oils like lemon and orange are photosensitive — avoid sun exposure after use on skin.
Soap Making & Candle Making
For makers, crafters & small batch producers
🫧
Soap Making
Cold Process & Melt-Pour
- 1Prepare your soap base (cold process or melt-and-pour)
- 2Cool to below 50°C before adding essential oil
- 3Add at 2–3% of total oil weight (20–30ml per 1kg base)
- 4Stir thoroughly before pouring into mould
- 5Cold process: cure for 4–6 weeks. Melt-pour: use in 24–48 hrs
💧 20–30ml per 1kg soap base
💡 Lavender, Lemongrass, Peppermint, Tea Tree, and Eucalyptus hold scent well in soap.
🕯️
Candle Making
Soy, Paraffin, Beeswax
- 1Melt your wax (any candle-making wax) to the recommended pour temperature
- 2Remove from heat and let cool to 60–65°C
- 3Add essential oil at 6–10% of wax weight (60–100ml per 1kg wax)
- 4Stir for 2 minutes to fully incorporate
- 5Pour slowly into prepared containers. Cure 48 hrs before burning
💧 6–10% (60–100ml per 1kg wax)
💡 Essential oils have lower flash points than fragrance oils — stay within safe usage rates to prevent fire risk.
💄
Cosmetic Products
Lip Balms, Face Masks, Blushes
- 1Identify your cosmetic base (wax, butter, clay, gel)
- 2Use cosmetic-grade essential oil only
- 3Add at 0.5–1% for leave-on products, up to 2% for rinse-off
- 4Blend thoroughly at room temperature
- 5Conduct stability and patch tests before retail use
💧 0.5–1% for leave-on products
💡 Always check IFRA guidelines for cosmetic-grade essential oil usage rates before formulating.
Home Care Products
Essential oils in cleaning, freshening & home formulations
🧹
Home Cleaners
Surface Sprays, Floor Cleaners
- 1Fill a spray bottle with water + a small amount of castile soap
- 2Add 15–20 drops of essential oil per 250ml water
- 3Shake before every use (oil and water separate naturally)
- 4Spray on surfaces and wipe clean
💧 15–20 drops per 250ml
💡 Best for cleaning: Tea Tree (antibacterial), Lemon (degreaser), Eucalyptus (fresh), Lavender (bathroom)
🌸
Room Fresheners
Sprays & Fabric Fresheners
- 1Mix 10–15 drops of essential oil into 100ml distilled water
- 2Optional: add 1 tsp of rubbing alcohol as an emulsifier
- 3Pour into a fine-mist spray bottle
- 4Shake before use and mist into the air or onto fabric
💧 10–15 drops per 100ml water
💡 Best room scents: Lemongrass (fresh), Orange (warm), Lavender (relaxing), Peppermint (energising)
🪣
Laundry & Fabric Care
Detergents, Fabric Softeners
- 1Add 5–10 drops to your liquid detergent per load
- 2Or add drops directly to the fabric softener compartment
- 3For handwash: add 3–5 drops to wash water
- 4For linen sprays: 10 drops per 100ml water in a spray bottle
💧 5–10 drops per laundry load
💡 Lavender on bed linens = falling asleep faster. Lemon in laundry = bright, clean smell.
How to Use Your Diffuser
Use Diffuser Aroma Oils only — not for skin or hair
🕯️
Candle Burner Diffuser
Uses a tea light candle to heat water and oil in a ceramic bowl above.
- Fill the top bowl with clean water (3/4 full)
- Add 5–10 drops of Diffuser Aroma Oil
- Place a tea light candle underneath and light it
- Refill water as it evaporates — never let it run dry
- Blow out candle when done. Never leave unattended
💧 5–10 drops
⚡
Electric Diffuser
Uses a heated plate or bulb to warm and diffuse fragrance. No water needed.
- Plug in and allow to warm up for 2 minutes
- Place 3–5 drops on the fragrance pad or tray
- Replace pad/tray every 1–2 weeks or when scent fades
- Do not overfill — a little goes a long way
- Switch off when leaving the room for extended periods
💧 3–5 drops on pad/tray
🌫️
Mist / Ultrasonic Diffuser
Uses ultrasonic vibrations to create a cool, fine mist. Most popular home diffuser type.
- Fill water tank to the fill line with clean water
- Add 5–15 drops of Diffuser Aroma Oil
- Replace lid securely and switch on
- Run for 30–60 mins at a time for best scent diffusion
- Empty and rinse tank every 2–3 days to prevent buildup
💧 5–15 drops per tank
🏢
HVAC Diffuser
Connects to your HVAC / AC system to distribute fragrance throughout a large space.
- Install the diffuser unit near the air return vent
- Fill the reservoir with Diffuser Aroma Oil (no water needed)
- Set the intensity dial to your preference (start low)
- The HVAC system carries the scent through all rooms
- Refill reservoir when scent level drops (weekly–monthly)
💧 Fill reservoir — intensity via dial
🌾
Reed Diffuser
Rattan reeds absorb the oil and passively diffuse the scent into the room. Zero electricity needed.
- Pour Diffuser Aroma Oil into the glass vessel (half full)
- Insert 5–8 rattan reed sticks
- Flip reeds after 24 hours for an initial scent boost
- Flip again every 1–2 weeks to refresh the scent
- Top up oil when level drops below 1/4 of the vessel
💧 Fill vessel half full
❄️
Cold Air Diffuser
Uses pressurised cold air (no heat, no water) to atomise oil into a dry micro-mist. Ideal for large spaces.
- Fill the glass reservoir with Diffuser Aroma Oil only (no water)
- Set intensity and timer as per your device settings
- Run in 30-minute intervals to avoid over-saturation
- Clean glass bulb monthly with rubbing alcohol
- Do not use thick or blended oils — pure oils work best
💧 Fill glass reservoir directly
🔬
Nebulizer Diffuser
Breaks oil into the finest particles without heat or water. Delivers the most concentrated aroma experience.
- Pour 5–10ml of Diffuser Aroma Oil into the glass nebulizer
- Attach glass top securely to the base unit
- Start at lowest intensity setting and increase as needed
- Run for 15–30 minutes at a time — very potent diffusion
- Clean glass with alcohol after switching oils
💧 5–10ml per session
Quick Dilution Reference Guide
Essential oils only — always dilute before skin use
| Use Case | Dilution % | Drops per 10ml carrier | Notes |
|---|---|---|---|
| Face serum / facial oil | 1-2% | 2 drops | Always patch test first. Avoid eye area. |
| Body massage oil | 2–3% | 4–6 drops | Safe for regular adult use on body |
| Scalp & hair oil | 2–3% | 4–6 drops | Rinse out after 30 mins or leave overnight |
| Bath oil (add to bath water) | 1–2% | 5–10 drops in full bath | Always dilute in carrier before adding to bath |
| Soap making | 2–3% | 20–30ml per 1kg base | Add after cooling below 50°C |
| Candle making | 6–10% | 60–100ml per 1kg wax | Add at 60–65°C. Check flash point. |
| Home spray / room freshener | 1–2% | 10–15 drops per 100ml water | Shake before each use |
| Shampoo / conditioner | 1–2% | 10 drops per 100ml product | Stir gently. Use within 3 months. |
| Diffuser (ultrasonic / mist) | Use as-is | 5–15 drops per tank | Use Diffuser Aroma Oils only. Not for skin. |
All information on this page is for general guidance only and does not constitute medical advice. Always consult a qualified professional for skin conditions. Keep all oils out of reach of children. For External Use Only.